Product Description
Wilden P2 Clamped Plastic Pump for Chemical Transfer
The Wilden P2 Clamped Plastic Pump is a 25 mm (1-inch) air-operated double-diaphragm pump for chemical transfer and rugged industrial duties. Its polypropylene or PVDF wetted housing provides corrosion resistance for many compatible process liquids. Moreover, its clamp-band construction gives technicians quick access to the internal components. Consequently, the pump combines dependable performance with straightforward maintenance.
Wilden P2 Pump Flow and Pressure
Maximum flow depends on the diaphragm configuration:
- Rubber: Up to 140 lpm
- TPE: Up to 140 lpm
- Full-Stroke PTFE: Up to 139 lpm
- Reduced-Stroke PTFE: Up to 132 lpm
In addition, maximum discharge pressure reaches 8.6 bar or 125 psi. However, actual output depends on compressed-air volume, viscosity, discharge pressure and piping resistance. Therefore, users should select the P2 AODD pump from its performance curve rather than relying only on the maximum flow figure.
Key Features of the P2 AODD Pump
- 25 mm or 1-inch liquid inlet and discharge
- ¼-inch FNPT compressed-air inlet
- Maximum flow up to 140 lpm
- Maximum pressure of 8.6 bar
- Solids passage up to 3.2 mm
- DIN or ANSI flanged connections
- Polypropylene or PVDF wetted housings
- Rotatable inlet and discharge manifolds
- Rubber, TPE and PTFE diaphragm options
- Clamped construction for faster servicing
- Strong wet and dry suction capability
- Lube-free pneumatic operation
- Simple installation and maintenance
Together, these features make the P2 AODD pump suitable for transfer, unloading, circulation and compatible particle-containing fluids.
Pro-Flo Clamped Plastic Pump Design
The Pro-Flo clamped plastic pump uses clamp bands to secure the manifolds, liquid chambers and centre section. Consequently, technicians can dismantle and reassemble the pump with a single tool.
Moreover, quick access to the diaphragms, valve balls and seats can reduce servicing time. Therefore, the Wilden P2 pump suits facilities where frequent inspection, cleaning or component replacement is required.
Polypropylene and PVDF P2 Pump Construction
The Wilden P2 Clamped Plastic Pump is available with polypropylene or PVDF wetted housings.
Polypropylene suits many compatible acids, alkalis and water-treatment chemicals. Alternatively, PVDF offers different chemical and temperature resistance for selected aggressive liquids.
However, neither material is compatible with every fluid. Therefore, users must verify the concentration, temperature and complete chemical composition before ordering the P2 chemical pump.
P2 Diaphragm and Elastomer Options
The P2 plastic diaphragm pump supports rubber, TPE, Full-Stroke PTFE and Reduced-Stroke PTFE configurations.
Moreover, available elastomers include Buna-N, EPDM, FKM, Neoprene, PTFE, polyurethane, Saniflex and Wil-Flex. Each material provides different chemical, temperature and abrasion resistance. Consequently, the diaphragms, valve balls, seats and seals should all match the transferred liquid.
One-Inch Flanged P2 Pump Connections
The Wilden P2 Clamped Plastic Pump uses 1-inch DIN or ANSI flanged inlet and discharge connections. Moreover, both manifolds are rotatable. Therefore, installers can adjust the connection positions to suit the available pipework.
In addition, flanged connections provide secure integration with industrial pipelines. However, users should confirm the flange standard, gasket material and piping arrangement before installation.
P2 Solids Handling and Suction Performance
The Pro-Flo P2 pump passes compatible solids up to 3.2 mm or ⅛ inch. As a result, it may handle selected liquids containing small suspended particles.
Maximum dry suction lift reaches 5.5 m with rubber or TPE, 4.1 m with Full-Stroke PTFE and 3.4 m with Reduced-Stroke PTFE. Meanwhile, maximum wet suction lift reaches approximately 8.6 to 8.8 m.
However, viscosity, elevation and inlet restrictions affect actual performance. Therefore, difficult-suction or particle-heavy applications require a complete duty review.
Wilden P2 Pump Applications
The Wilden P2 Clamped Plastic Pump may support:
- Chemical processing
- Acid and alkaline transfer
- Water and wastewater treatment
- Tank and container unloading
- Paint and coating circulation
- Industrial cleaning systems
- Adhesives and sealants
- Corrosive wastewater transfer
- Filtration circulation
- General industrial transfer
For example, polypropylene may suit compatible general chemicals. Alternatively, PVDF may support selected aggressive liquids after a compatibility review. Moreover, operators can regulate the transfer rate by adjusting the compressed-air supply.
Selecting a Wilden P2 Chemical Pump
Correct selection depends on flow, pressure, chemical concentration, temperature, viscosity and solids content.
In addition, users should confirm the housing, diaphragm materials, flange standard, suction conditions and available compressed-air volume. Therefore, the Wilden P2 Clamped Plastic Pump should be configured around the complete hydraulic and chemical duty.
Otherwise, incompatible materials may cause premature wear. Similarly, insufficient air volume may reduce flow and efficiency.
Why Choose the Wilden Pro-Flo P2?
The Pro-Flo P2 combines corrosion-resistant thermoplastic construction with quick clamp-band servicing. Moreover, its rotatable manifolds, dependable suction and broad elastomer selection support varied industrial requirements.
Consequently, this 1-inch AODD pump provides a practical solution for UAE facilities requiring reliable chemical transfer and simplified maintenance.
Request a Wilden P2 Pump in the UAE
Contact our pump specialists for technical selection, specifications and UAE pricing.
Please provide the liquid, concentration, temperature, required flow, pressure, solids content and compressed-air supply. Consequently, our team can recommend the correct Wilden P2 Clamped Plastic Pump configuration.