Product Description
Pompetravaini TRS Single-Stage Liquid Ring Pumps
The Pompetravaini TRS Single-Stage Liquid Ring Pumps provide reliable low- and medium-vacuum performance for industrial process systems. Their liquid ring technology handles compatible gases, vapours and moist process streams while maintaining steady operation.
Moreover, the complete TRS Series offers capacities up to 3,500 m³/h and operating pressures down to approximately 150 mbar absolute. Consequently, these pumps suit large installations that require controlled vacuum rather than deep high-vacuum performance.
TRS Single-Stage Liquid Ring Vacuum Design
The TRS pump uses one liquid ring compression stage. Therefore, it provides an efficient solution for low- and medium-vacuum applications.
During operation, the rotating impeller forms a liquid ring inside the casing. As a result, the liquid seals the compression chambers and absorbs heat from the gas.
Moreover, the Travaini TRS liquid ring pump can tolerate compatible moisture and condensable vapours. Consequently, it supports process duties that may challenge some dry vacuum technologies.
Key Features of Pompetravaini TRS Vacuum Pumps
- Single-stage liquid ring construction
- Designed for low and medium vacuum
- Capacity up to 3,500 m³/h
- Operating pressure down to approximately 150 mbar
- Reduced number of internal components
- Strong and rigid pump construction
- Short shaft for improved stability
- Reduced shaft-deflection risk
- Lower vibration at seals and bearings
- DIN 24960 mechanical-seal compatibility
- Double mechanical-seal options
- Cartridge mechanical-seal options
- Special corrosion-resistant materials
- Broad range of pump models
Together, these features make the Pompetravaini TRS Single-Stage Liquid Ring Pumps suitable for continuous industrial vacuum duties.
Robust TRS Industrial Vacuum Pump Construction
Pompetravaini manufactures the TRS pump with fewer components than many conventional designs. Consequently, the pump gains additional rigidity and mechanical strength.
Moreover, fewer components simplify assembly and provide easier access during maintenance. As a result, technicians can inspect and service the industrial liquid ring vacuum pump more efficiently.
Short-Shaft Travaini TRS Pump Design
The TRS design uses a significantly shortened shaft. Therefore, it reduces the risk of shaft deflection during continuous operation.
Furthermore, the shorter shaft helps control vibration near the bearings and mechanical seals. Consequently, the Pompetravaini TRS Single-Stage Liquid Ring Pumps can limit unnecessary seal and bearing wear.
TRS Mechanical-Seal Options
The Pompetravaini TRS vacuum pump accepts unified mechanical seals according to DIN 24960 standards.
Moreover, users can select double mechanical seals in tandem or back-to-back arrangements. Alternatively, Pompetravaini can provide cartridge-type mechanical seals for specialised applications.
Therefore, engineers can match the seal configuration to the gas composition, service liquid, containment requirements and maintenance strategy.
Corrosion-Resistant TRS Pump Materials
Pompetravaini offers special construction materials for aggressive process conditions.
For example, available options may include:
- Ni-Resist D2B
- Hastelloy B
- Hastelloy C
- Uranus B6
- Other duty-specific materials
Consequently, the TRS single-stage vacuum pump can support selected corrosive gases, vapours and service liquids. However, engineers must verify chemical concentration, temperature and compatibility before choosing the pump material.
Service Liquid for TRS Liquid Ring Pumps
The Travaini TRS liquid ring pump requires service liquid to form the operating ring. In addition, this liquid seals the compression spaces and removes heat.
Therefore, the system must supply suitable service liquid continuously or through a controlled recirculation arrangement.
Alternatively, a separator and heat exchanger can recover, cool and return the service liquid. As a result, a recirculation system may reduce water consumption and liquid discharge.
Pompetravaini TRS Pump Performance Range
The published TRS Series limits include:
- Maximum capacity: 3,500 m³/h
- Operating pressure: Down to approximately 150 mbar
- Pumping arrangement: Single stage
- Technology: Liquid ring
- Primary duty: Low and medium vacuum
However, these figures represent the complete range. Therefore, users should not assign 3,500 m³/h at 150 mbar to every TRS liquid ring vacuum pump.
Actual performance depends on the selected model, operating speed, inlet conditions, gas composition and service-liquid temperature.
UAE Applications for TRS Liquid Ring Vacuum Pumps
The Pompetravaini TRS Single-Stage Liquid Ring Pumps may support:
- Chemical-process vacuum
- Petrochemical production
- Pharmaceutical manufacturing
- Vacuum filtration
- Vacuum drying
- Reactor evacuation
- Condenser evacuation
- Vapour extraction
- Deaeration systems
- Food-processing vacuum
- Pulp and paper processes
- Central industrial vacuum systems
Moreover, liquid ring technology handles compatible moisture and condensable vapours effectively. Nevertheless, users must review the process gas, condensable load, vacuum level and service liquid for every application.
Selecting a TRS Single-Stage Vacuum Pump
Correct selection depends on the required capacity, operating vacuum, gas composition, inlet temperature and condensable loading.
In addition, users should confirm the service-liquid type, service-liquid temperature, construction material, seal configuration and motor power.
Therefore, specialists should select the Pompetravaini TRS Single-Stage Liquid Ring Pumps from model-specific performance curves. Otherwise, unsuitable liquid conditions or incorrect materials may reduce capacity and operating life.
Request a Pompetravaini TRS Pump in the UAE
Contact our pump specialists for technical selection, specifications and UAE pricing.
Please provide the required capacity, operating vacuum, gas composition, inlet temperature, condensable load and preferred service liquid. Consequently, our team can recommend the correct Pompetravaini TRS Single-Stage Liquid Ring Pumps model, material and sealing arrangement.