Product Description
Toyo K Slurry Pumps
The Toyo K Slurry Pumps provide heavy-duty submersible pumping for abrasive wastewater and dense slurry containing fibrous material. Their patented agitator mounts directly on the impeller and integrates with the pump inlet. Therefore, it helps prevent fibres from stopping impeller rotation.
Moreover, the single-channel impeller provides a large solids passage. Consequently, the pump combines the clog resistance of a wastewater pump with the wear resistance required for abrasive slurry duties.
Toyo K Agitator Pump Design
The Toyo K agitator pump uses a single-channel centrifugal impeller. In addition, the agitator rotates directly with the impeller instead of mounting separately on the shaft.
As a result, the agitator loosens compatible settled material and guides it towards the hydraulic inlet. Moreover, its integrated design helps prevent fibrous waste from wrapping around the inlet and blocking rotation.
Main Features and Benefits
- Patented inlet-integrated agitator
- Single-channel centrifugal impeller
- Large solids passage
- Suitable for abrasive and fibrous slurry
- Capacity up to 90 m³/h
- Solids concentration up to 50% by weight
- Particle passage up to 70 mm
- High-chrome hydraulic wear components
- Strong stainless-steel shaft
- Heavy-duty bearing arrangement
- Standard thermal motor protection
- Standard moisture sensor
- Alternative metallurgy options
- Detachable bend and base options
- High-temperature versions available
Together, these features make the Toyo K Slurry Pumps suitable for difficult wastewater and solids-transfer systems.
K Slurry Pump Performance
The K submersible slurry pump range provides capacities up to approximately 90 m³/h. Moreover, suitable configurations handle slurry containing up to 50% solids by weight.
Toyo also positions the range for heavy slurry densities of approximately 1.25 kg/dm³ and above. However, these figures represent series-wide capabilities. Therefore, engineers must select the exact model from its individual hydraulic and solids-handling data.
Large Solids Passage
The hydraulic design passes compatible particles measuring up to 70 mm. Consequently, the pump can transfer large solids that would obstruct pumps with narrower passages.
Moreover, the single-channel impeller provides a relatively unobstructed route through the casing. Nevertheless, the permissible particle size depends on the selected model.
Therefore, users must confirm particle shape, hardness and dimensions before ordering the pump.
High-Chrome Wear Components
Toyo manufactures the impeller, suction cover and agitator from cast chrome iron containing approximately 24% to 28% chromium.
As a result, these components resist abrasive wear from sand, grit, minerals and industrial sediment. Moreover, their robust construction supports longer service intervals in demanding slurry applications.
However, wear rate still depends on particle hardness, velocity, solids concentration and operating point.
Toyo K Motor and Protection
A strong stainless-steel shaft transfers motor torque to the upper side of the impeller. Meanwhile, carefully selected bearings support the shaft during heavy slurry operation.
In addition, Toyo includes thermal protection as standard. Therefore, the system can detect excessive motor temperature and support suitable shutdown protection when connected to the correct control panel.
Seal Monitoring and Moisture Protection
The Toyo K Slurry Pumps include a standard moisture sensor. Consequently, the control system can detect liquid intrusion before it causes serious motor damage.
Moreover, early moisture detection allows operators to schedule inspection and maintenance. Therefore, facilities should connect the sensor to a compatible alarm or protection circuit rather than leaving it unused.
Installation and Metallurgy Options
Toyo offers K pumps in different metallurgies, including stainless-steel configurations. Therefore, engineers can select materials according to abrasion, corrosion and liquid chemistry.
In addition, selected pumps can use a detachable discharge bend and base. Consequently, facilities can simplify permanent installation and pump removal.
However, material and installation options depend on the exact model and ordered construction.
Operating Limits
Published K Series limits include:
- Maximum capacity: Up to 90 m³/h
- Solids content: Up to 50% by weight
- Particle size: Up to 70 mm
- Standard liquid temperature: Up to 60°C
- High-temperature version: Up to 80°C
- Permitted pH range: 4–14
- Maximum operating depth: 30 metres
However, these maximum values do not apply simultaneously to every pump. Therefore, users must confirm the selected model’s individual limits.
K Wastewater Slurry Applications
The Toyo K wastewater pump may support:
- Fibrous industrial wastewater
- Abrasive sewage and sludge
- Pulp and paper wastewater
- Textile-process wastewater
- Food-processing residue
- Livestock wastewater
- Industrial sump cleaning
- Wastewater-treatment sludge
- Mineral-containing effluent
- Tank and lagoon clean-out
- Heavy sediment transfer
- Dense slurry containing large solids
Moreover, the inlet-integrated agitator suits duties where fibres could obstruct conventional slurry-pump rotation.
Nevertheless, engineers must review chemical composition, fibre length, particle hardness and solids concentration before selection.
Choosing the Correct Toyo K Pump
Correct selection depends on flow, total head, slurry density, solids percentage and maximum particle size.
In addition, engineers should confirm fibre content, pH, temperature, operating depth, metallurgy and installation arrangement. Therefore, specialists should select the Toyo K Slurry Pumps from model-specific performance data.
Otherwise, an unsuitable configuration may clog, wear rapidly or overload the motor.
Request UAE Pricing and Technical Support
Contact our pump specialists for technical selection, specifications and UAE pricing.
Please provide the required flow, total head, slurry density, solids concentration, particle size, fibre content and temperature. Consequently, our team can recommend the correct Toyo K Slurry Pumps configuration.