Product Description
QUANTM i80 Electric Double Diaphragm Pump
The QUANTM i80 Electric Double Diaphragm Pump provides efficient fluid transfer for industrial production systems. Moreover, its lightweight design and compact footprint simplify installation in manufacturing plants.
The pump uses 1½-inch or 38.1 mm inlet and outlet connections. In addition, it delivers flow rates up to 80 GPM or approximately 300 L/min.
Unlike conventional air-operated pumps, the QUANTM i80 uses an integrated electric drive. Therefore, it can significantly reduce compressed-air consumption and operating costs.
Reduce Energy and Manufacturing Costs
Compressed-air generation normally requires substantial electrical power. Consequently, pneumatic diaphragm pumps may create high long-term operating costs.
Graco states that QUANTM pumps can reduce energy consumption by up to 80% compared with air-operated diaphragm pumps. Moreover, the i80 may reduce manufacturing costs by up to 50% in suitable applications.
As a result, energy savings and available rebates may allow the pump to recover its purchase cost within 12 months. However, actual payback depends on operating hours, electricity prices, compressed-air efficiency and local incentives.
Key Benefits of the QUANTM i80
The QUANTM i80 offers several operational advantages:
- Electric-operated double diaphragm technology
- 1½-inch or 38.1 mm ports
- Maximum flow up to 80 GPM
- Metric flow up to approximately 300 L/min
- Maximum pressure up to 6.9 bar
- Energy savings of up to 80%
- Manufacturing cost reduction of up to 50%
- Compact and lightweight construction
- High continuous torque at low speeds
- Variable-speed operation
- Self-priming performance
- Seal-free fluid section
- Dry-running capability
- Pressure-stall protection
- Integrated remote-control I/O
- Solids handling up to 4.8 mm
- Quiet, muffler-free operation
- Hazardous-location configurations available
Together, these features support reliable production. Moreover, they can lower energy consumption and maintenance requirements.
Flow and Operating Performance
The QUANTM i80 provides the following operating capabilities:
- Maximum flow: 80 GPM or approximately 300 L/min
- Maximum fluid pressure: 100 PSI or 6.9 bar
- Connection size: 1½ inches or 38.1 mm
- Maximum pumpable solids: 4.8 mm
- Maximum fluid temperature: Up to 82°C on selected configurations
- Electrical options: 200–240V and 380–480V configurations
- Installation protection: IP66 on applicable models
However, exact limits depend on the selected fluid section, elastomers and electrical configuration. Therefore, users should confirm the complete model specification before ordering.
Xtreme Torque Motor Technology
The QUANTM i80 uses Graco’s Xtreme Torque electric motor and drive.
This motor provides up to eight times more continuous torque at low speeds than conventional motors. Consequently, the pump can maintain reliable performance during difficult fluid-transfer duties.
Moreover, the drive removes the need for a conventional gearbox, belts and chains. As a result, the pump has fewer complex drive components and requires less installation space.
Pressure-Stall Protection
The QUANTM i80 can stall safely when discharge pressure exceeds the pump output.
Therefore, the system does not rely solely on separate pressure sensors or additional controllers to protect the pump from closed valves and clogged lines.
Once the restriction clears, the pump can resume operation. Consequently, this feature can reduce pump failures and production downtime.
Self-Priming and Seal-Free Operation
The double-diaphragm design provides self-priming performance. Therefore, the pump can draw liquid from drums, tanks and sumps under suitable suction conditions.
In addition, the fluid section does not use a rotating mechanical seal. As a result, the pump can run dry under appropriate operating conditions without damaging a mechanical seal.
Moreover, the seal-free design reduces common leakage and maintenance concerns.
Automation and Variable-Speed Control
Integrated I/O allows the QUANTM i80 to communicate with plant-control equipment.
For example, operators can control:
- Pump start and stop
- Operating speed
- Fluid flow
- Remote production sequences
- PLC-based operation
- Level-sensor integration
Consequently, users can match pump output with actual production demand. Moreover, automated control reduces the need for continuous operator supervision.
Fluid-Section Options
Selected QUANTM i80 configurations use:
- Aluminium
- Stainless steel
- Polypropylene
- Other corrosion-resistant materials
In addition, several ball, seat, diaphragm and seal combinations are available.
Therefore, users can configure the pump for abrasive liquids, aggressive chemicals and shear-sensitive products. However, they must verify compatibility with the liquid concentration, temperature and solids content.
QUANTM i80 Applications in the UAE
The QUANTM i80 suits many UAE applications, including:
- Chemical processing
- Paints and coatings
- Wastewater transfer
- General manufacturing
- Sump evacuation
- Tank unloading
- Detergent transfer
- Oil and solvent transfer
- High- and low-pH liquids
- Abrasive materials
- Solids-laden fluids
- Production-line circulation
For example, an aluminium configuration can support compatible oils, solvents and abrasive fluids. Similarly, stainless-steel or polymer configurations can support selected corrosive chemicals.
Why Choose the QUANTM i80?
The QUANTM i80 combines proven diaphragm-pump operation with an efficient electric drive.
Therefore, it is a practical choice for UAE facilities that require:
- Lower energy consumption
- Reduced compressed-air dependence
- High industrial flow capacity
- Compact installation
- Variable-speed operation
- Quiet performance
- Simplified maintenance
- Remote process integration
- Flexible material options
Moreover, its plug-and-play design can simplify the replacement of existing pneumatic pumps.
Request a QUANTM i80 Pump in the UAE
Contact our pump specialists for model selection, technical specifications and UAE pricing.
Please provide the required flow, pressure, liquid name, viscosity, temperature, solids content, electrical supply and preferred fluid-section material. With this information, our team can recommend the correct QUANTM i80 configuration.