Product Description
QUANTM i120 Electric Double Diaphragm Pump
The QUANTM i120 Electric Double Diaphragm Pump provides efficient and reliable fluid transfer for industrial production lines. Moreover, its lightweight construction and compact footprint simplify installation in busy manufacturing facilities.
The pump uses a 2-inch or 50.8 mm fluid port. In addition, it delivers flow rates up to 454 litres per minute.
Unlike conventional air-operated pumps, the i120 uses an integrated electric drive. Therefore, it can significantly reduce energy consumption and operating costs.
Energy-Efficient Electric Pumping
Compressed-air systems often consume large amounts of energy. Consequently, replacing an air-operated diaphragm pump with an electric model can reduce utility costs.
The QUANTM i120 can use up to 80% less energy than comparable air-operated diaphragm pumps. Moreover, the electric drive removes the need for compressed-air infrastructure.
As a result, the pump supports lower operating costs and corporate sustainability targets. Depending on energy savings and available rebates, Graco states that the investment may pay back in less than one year.
Key Benefits of the QUANTM i120
The QUANTM i120 offers several operational advantages:
- Electric-operated double diaphragm technology
- 2-inch fluid inlet and outlet
- Maximum flow up to 454 litres per minute
- Maximum pressure up to 4.1 bar
- Energy consumption reduction of up to 80%
- Compact and lightweight construction
- High continuous torque at low speeds
- Variable-speed fluid control
- Self-priming operation
- Dry-running capability
- Pressure-stall protection
- Seal-free fluid section
- Remote control through integrated I/O
- Quiet operation
- Solids handling up to 6.4 mm
- Hazardous-location models available
- Multiple fluid-section materials
Together, these features support reliable production while reducing energy and maintenance demands.
Flow and Pressure Performance
The QUANTM i120 provides the following operating capabilities:
- Maximum flow: 120 gallons per minute
- Maximum metric flow: 454 litres per minute
- Maximum pressure: 60 PSI
- Maximum metric pressure: 4.1 bar
- Port size: 2 inches or 50.8 mm
- Maximum solids size: Up to 6.4 mm
- Available power options: 240V and 380–480V configurations
However, exact electrical and performance specifications depend on the selected model. Therefore, users should confirm the complete configuration before ordering.
Xtreme Torque Motor Technology
The QUANTM i120 uses Graco’s high-torque electric motor and drive system.
The motor provides strong continuous torque at low speeds. Consequently, the pump can transfer difficult fluids while maintaining stable performance.
Moreover, the drive does not require a conventional gearbox, belts or chains. As a result, the pump has fewer complex drive components and a smaller footprint.
Pressure-Stall Protection
The QUANTM i120 can stall safely when discharge pressure exceeds the pump output.
Therefore, the system may not require separate pressure sensors or additional controls solely to protect against closed valves and blocked lines.
Once the restriction clears, the pump can resume operation. Consequently, this feature can reduce downtime and simplify system design.
Self-Priming and Dry-Running Operation
The double-diaphragm design provides strong self-priming performance. Therefore, the pump can draw liquid from a supply vessel under suitable suction conditions.
In addition, the QUANTM i120 can run dry without damaging a mechanical seal. This capability supports tank-emptying, sump-transfer and intermittent-feed applications.
However, users should still follow Graco’s installation and operating requirements.
Automation and Remote Control
Integrated I/O allows the pump to connect with plant-control equipment.
For example, operators can use a PLC to manage:
- Pump start and stop
- Operating speed
- Remote process control
- Production-line integration
- Automated fluid transfer
Consequently, the pump can operate with less manual oversight. Moreover, variable-speed control allows users to match flow with actual production demand.
Fluid and Material Compatibility
Available fluid-section materials include:
- Aluminium
- Cast iron
- Polypropylene
- Conductive polypropylene
- Stainless steel
- PVDF
In addition, several diaphragm, ball, seat and seal materials are available.
Therefore, users can configure the pump for many industrial liquids. However, they must confirm compatibility with the chemical, concentration, temperature and solids content.
QUANTM i120 Applications in the UAE
The QUANTM i120 Electric Double Diaphragm Pump suits:
- Chemical processing
- Paints and coatings
- Wastewater transfer
- General manufacturing
- Tank unloading
- Sump evacuation
- Detergent transfer
- High- and low-pH liquids
- Abrasive fluid transfer
- Solids-laden liquids
- Shear-sensitive products
- Production-line fluid circulation
For example, chemical plants can use corrosion-resistant configurations for aggressive liquids. Similarly, paint manufacturers can select metal fluid sections for coatings and abrasive materials.
Why Choose the QUANTM i120?
The QUANTM i120 combines proven diaphragm-pump operation with an efficient electric drive.
Therefore, it is a practical choice for UAE facilities that require:
- Lower energy consumption
- Reduced compressed-air dependence
- High industrial flow rates
- Compact installation
- Variable-speed control
- Quiet operation
- Simplified maintenance
- Remote process integration
- Flexible material options
Request a QUANTM i120 Pump in the UAE
Contact our pump specialists for model selection, technical specifications and UAE pricing.
Please provide the required flow, discharge pressure, liquid name, viscosity, temperature, solids content, electrical supply and preferred fluid-section material. With this information, our team can recommend the correct QUANTM i120 configuration.