Product Description
Pompetravaini TCH G1-3 Centrifugal Pumps
The Pompetravaini TCH G1-3 Centrifugal Pumps are horizontal, single-stage process pumps with closed impellers. They are designed according to ISO 2858 and ISO 5199 requirements; therefore, they provide recognised dimensions, dependable mechanical construction and efficient hydraulic performance.
The range handles clean or slightly contaminated liquids, including hot, superheated, acidic and caustic fluids. Moreover, maximum series performance reaches 500 m³/h and 16 bar.
TCH Closed-Impeller Centrifugal Pump Design
The closed impeller provides controlled hydraulic passages for efficient transfer of clean and lightly contaminated liquids. Consequently, the Travaini TCH process pump supports stable flow and pressure in continuous industrial systems.
In addition, the range offers high hydraulic efficiency and relatively low NPSH requirements. Therefore, correct TCH pump selection can reduce energy consumption while helping limit cavitation risk.
Key Features of Pompetravaini TCH G1-3 Pumps
- Single-stage centrifugal construction
- Closed hydraulic impeller
- ISO 2858 and ISO 5199 design
- Capacity up to 500 m³/h
- Head up to 16 bar
- High hydraulic efficiency
- Low NPSH requirements
- Multiple construction materials
- Packed gland or mechanical-seal options
- Single and double mechanical seals
- API-compatible seal arrangements
- Heating or cooling chambers
- Close-coupled options up to 30 kW
- ATEX configurations
- MOCA food-industry configurations
Together, these features make the Pompetravaini TCH G1-3 Centrifugal Pumps suitable for varied chemical, process and utility duties.
ISO 2858 Chemical-Process Pump Standards
The TCH G1-3 pump dimensions and performance follow ISO 2858 and DIN 24256 standards. Consequently, the range can integrate into recognised end-suction process-pump layouts.
Moreover, ISO-standard dimensions may simplify replacement within compatible installations. However, engineers must still verify the baseplate, motor, coupling, flange sizes and operating point before replacing another pump.
TCH Pump Construction Materials
Pompetravaini offers numerous material configurations, ranging from cast iron and stainless steel to SAF duplex alloys and Hastelloy.
Therefore, users can select the Pompetravaini TCH G1-3 Centrifugal Pumps according to corrosion resistance, temperature and mechanical requirements.
For example, cast iron may suit compatible water and utility duties. Alternatively, stainless steel, duplex alloy or Hastelloy may support more aggressive chemicals after a complete compatibility review.
Travaini TCH Shaft-Sealing Options
The TCH single-stage centrifugal pump can use a packed stuffing box or single and double mechanical seals.
Moreover, mechanical seals can follow ISO 3069 and UNI EN 12756 dimensions. API-style installation arrangements are also available. Consequently, engineers can configure the sealing system around leakage control, operating temperature and liquid hazard.
The bearing frame also provides room for selected cartridge seals and other specialised designs.
Heating and Cooling Chambers
The pump casing and mechanical-seal housing can be supplied with heating or cooling chambers.
Therefore, the Travaini TCH process pump can support liquids that must remain within a controlled temperature range. Heating may help prevent crystallisation or excessive viscosity. Alternatively, cooling may protect seals and nearby components from excessive temperature.
Close-Coupled TCH Pump Options
TCH units up to approximately 30 kW can be close coupled to B5-flange electric motors using a support lantern.
Consequently, the monoblock arrangement reduces installation dimensions and removes a separate flexible-coupling alignment procedure. Moreover, the rigid arrangement helps preserve pump and motor alignment after transportation.
TCH G1-3 Pump Performance Range
The complete series provides:
- Maximum capacity: 500 m³/h
- Maximum head: 16 bar
- Hydraulic arrangement: Single stage
- Impeller type: Closed impeller
- Available speeds: Multiple 50 Hz and 60 Hz options
However, these are maximum values across the full TCH G1-3 range. Therefore, users should not assign 500 m³/h at 16 bar to every model. The correct operating point depends on pump size, impeller diameter, speed and liquid properties.
UAE Applications for TCH Process Pumps
The Pompetravaini TCH G1-3 Centrifugal Pumps may support:
- Chemical processing
- Petrochemical plants
- Pharmaceutical manufacturing
- Food-processing systems
- Pulp and paper production
- Environmental facilities
- Steel manufacturing
- Textile processing
- Acid and caustic transfer
- Hot-liquid circulation
- Industrial water transfer
- General process applications
Moreover, ATEX configurations may support suitable hazardous-area installations. MOCA options are also available for compatible food-industry applications.
Selecting Pompetravaini TCH G1-3 Centrifugal Pumps
Correct selection depends on required flow, total head, liquid composition, temperature, viscosity and specific gravity.
In addition, users should confirm available NPSH, construction materials, seal arrangement, heating or cooling requirements, motor speed and power. Therefore, the Pompetravaini TCH G1-3 Centrifugal Pumps should be selected from model-specific performance curves.
Otherwise, an unsuitable operating point or material configuration may cause cavitation, leakage, excessive energy use or reduced service life.
Request a Pompetravaini TCH G1-3 Pump in the UAE
Contact our pump specialists for technical selection, specifications and UAE pricing.
Please provide the liquid, concentration, temperature, required flow, total head, suction conditions and motor requirements. Consequently, our team can recommend the correct Pompetravaini TCH G1-3 Centrifugal Pumps model, material and sealing configuration.