In Stock

Mechanical meters. Designed to measure the exact quantity of dispensed liquid (fuel or lubricant) for non commercial use. Reliable, economical and easy to install and calibrate on site. Also gravity functional thanks to reduced resistance to flow.

Brand:
Brands

Overview

K33 – K44

Mechanical meters. Designed to measure the exact quantity of dispensed liquid (fuel or lubricant) for non commercial use. Reliable, economical and easy to install and calibrate on site. Also gravity functional thanks to reduced resistance to flow.

  • Mod. K33, 3 digit partial totals (max 999 litres), 6 digit totals.
  • Mod. K44, 4 digit partial totals (max 9999 litres), 7 digit totals.
  • Mod. Pulser: “Open collector” card type, frequency 10 pulses/litre, power supply 6-24 V DC, max 10 mA.

Features

MODEL NO.

DESCRIPTION

P4-50-750-MK4VORTEX PNEUMATIC SUBMERSIBLE PUMP with STD CAST IRON INVOLUTE HOUSING and IMPELLER
P4-50-750AR-MK4VORTEX PNEUMATIC SUBMERSIBLE PUMP with ACID RESISTANT COATED INVOLUTE HOUSING and IMPELLER

 

FEATURE

BENEFIT

1
PUMPING SECTION
1.1Inverted Volute Chamber & Impeller with Side SuctionPump is placed on top of dirt not in it no need for water filtering screen.What it swallows it will pump.
1.2Vortex PumpingAbility to pump grit, fibers and small stones, without jamming.
1.3Inverted Impeller & Volute are made of SG42 CastIronAllows for flood feed through the sides, no suction required and hard wearing.
1.4Detachable Impeller cover with “o” ring seal.Three 17mm bolts remove the “O” ringed cover, gaining quick access to impeller for cleaning.
1.5Optinal High volume non-return valve.Helps to keep dirt out of the pump, when it stops pumping.
1.6Ability to lift the pump out of the water while running.Pump will maintain water pressure when lifted out of the water lowing transfer to next pump position with little back flow.
2
MOTOR SECTION
2.1Environmentally Friendly Lubrication-free motor.Motor can run continuously without oil, eliminating environmental oil pollution and has an extended motor life.
2.2Stainless steel Cylinder and hardened & rust-free motor parts.Rust free and highly wear resistant.
2.3An Inverted Impeller allows no high pressure water on spindle seals.Spindle seals control low exhaust air pressure in motor housing, from entering the pump volute. There is no high pressure water being controlled.
2.4Ability to run continuously out of water.Motor housing seal is cooled by air passing through the motor into the exhaust.
2.5SG42 Cast Iron Body.Very tough and durable
2.6Ergonomically designed carry handle.Easy to carry and is also the exhaust housing.
3
FILTER INLET SECTION
3.1Built in high capacity in line micro filtering system,with a flushable and replaceable filter element.Day to day element cleaning is easy and accessible and replacing is via external screw off cap.
3.2Filter ElementFilter Filters out dirt down to 120 micron particles.

Product Documents

Product Specifications

Product Enquiry

Back to Top