Standard Group
Home
 

Pneumatic Submersible Pumps

 

P4 Vortex Pneumatic Submersible Pump

The new ATS P4 Vortex Pneumatic Submersible Pump Mk4 is environmentally friendly with world class leading lubrication free pneumatic motor & rust-free technology.

Extending its life and boosting an extra 10 meters head higher than any pneumatic pump in its class. Specifically developed to operate under severe mining conditions.

Low air consumption, light weight, easy to carry and a combination of toughness, durability versatility and benefits never seen before, in a portable pump.

P4 Vortex Pneumatic Submersible Pump Specifications

Noise Level 85Dba @1m
Overall Height 435 mm
Overall Width 340 mm
Weight 17 Kg
Power Rating 4 Kw
Working Pressure 100-700 kPa
Air Inlet 1″ BSP
Air Outlet 25 mm
Water Outlet 2″ BSP
Swage Nipple Outlet 50 mm
Max Head @ 700 Kpa 80 m
Max Flow Rate @ 700 Kpa 764 L/min
Max Head @ 400 Kpa 53 m
Max Flow Rate @ 400 Kpa 674 L/min
 

Models

MODEL No.
DESCRIPTION
P4-50-750-MK4 VORTEX PNEUMATIC SUBMERSIBLE PUMP with STD CAST IRON INVOLUTE HOUSING and IMPELLER
P4-50-750AR-MK4 VORTEX PNEUMATIC SUBMERSIBLE PUMP with ACID RESISTANT COATED INVOLUTE HOUSING and IMPELLER
 

Feature & Benefits

Feature
Benefit
   
1.
Pumping Section
1.1 Inverted Volute Chamber & Impeller with Side Suction Pump is placed on top of dirt not in it no need for water filtering screen.What it swallows it will pump.
1.2 Vortex Pumping Ability to pump grit, fibers and small stones, without jamming.
1.3 Inverted Impeller & Volute are made of SG42 CastIron Allows for flood feed through the sides, no suction required and hard wearing.
1.4 Detachable Impeller cover with “o” ring seal. Three 17mm bolts remove the “O” ringed cover, gaining quick access to impeller for cleaning.
1.5 Optinal High volume non-return valve. Helps to keep dirt out of the pump, when it stops pumping.
1.6 Ability to lift the pump out of the water while running. Pump will maintain water pressure when lifted out of the water lowing transfer to next pump position with little back flow.
   
2
Motor Section
2.1 Environmentally Friendly Lubrication-free motor. Motor can run continuously without oil, eliminating environmental oil pollution and has an extended motor life.
2.2 Stainless steel Cylinder and hardened & rust-free motor parts. Rust free and highly wear resistant.
2.3 An Inverted Impeller allows no high pressure water on spindle seals. Spindle seals control low exhaust air pressure in motor housing, from entering the pump volute. There is no high pressure water being controlled.
2.4 Ability to run continuously out of water. Motor housing seal is cooled by air passing through the motor into the exhaust.
2.5 SG42 Cast Iron Body. Very tough and durable
2.6 Ergonomically designed carry handle. Easy to carry and is also the exhaust housing.
   
3
Filter Inlet Section
3.1 Built in high capacity in line micro filtering system,with a flushable and replaceable filter element. Day to day element cleaning is easy and accessible and replacing is via external screw off cap.
3.2 Filter Element Filter Filters out dirt down to 120 micron particles.
     
 

 
 
Adam
Affetti
Alma Pompe
Almatec
Argal
ATS
Blacoh
Euromotori
Finish Thompson Inc.
Fristam
Fujico
Griswold
Groz
HQ
Idrobase
IMAK
Neptune
Nova Rotors
Nov Mono
OSIP
Pedrollo - Centrifugal
Pedrollo - Submersible
PIUSI
PulsaFeeder
Quincy
Rovatti Pompe - Centrifugal
Rovatti Pompe - Submersible
Stanflo - Centrifugal
Stanflo - Submersible
Travaini Pumps
Valiadis
Viking
Wilden - Air Operated
Wilden - Sanitary & Food
Zenit

Facebook Twitter Google+ Instagram
VirtualReality